Schedule image capture/deployment with UEFI
Schedule image capture/deployment with UEFI OSD - Schedule template for the provisioning template you want to deployScheduled provisioning template deployment machines must be in the device list or a...
View ArticlePXE Boot devices with UEFI
NOTE: UEFI is only supported in Provisioning and not OSD. UEFI doesn't support a menu so you will need to use Scheduled Provisioning instead. Provisioning OSD PXE Boot devices with UEFI. You must...
View ArticleCapture Profile action is failing with a 259 error.
Applies to LANDesk Management Suite 9.5 and 9.5 SP1Issue:Capture Profile action is failing with a 259 error.Capture profile action is getting a timeout error.Cause: Capture Profile action has a 5...
View ArticleProvisioning Task failing after try 40 of 40
ProblemThe provisioning task is failing to load. It will attempt to load the template and retry for 40 attempts and then the job hangs and the PC stays in the WinPE screen or brings back the template...
View ArticleUnable to add devices to the Bare Metal Server view.
Issue:After adding a device using the "Add Bare Metal Server" wizard, no new device shows up in the device list. Cause:Typically this is caused by the Inventory Server Service on the core server not...
View ArticleLANDESK Provisioning and OSD fail after enabling FIPS on the core server
Issue After enabling FIPS on the core server, LANDESK OSD scripts and Provisioning templates stop working. After selecting and trying to launch an OSD script, nothing happens and the screen stays on...
View ArticleClik here to view.
UEFI network boot PXE error: PXE-E21: Remote boot cancelled
Issue Booting a machine in UEFI mode in a network segment with an active PXE representative doesn't make the machine loading WinPE.The PXE menu doesn't appear.The machine reports the error PXE-E21:...
View ArticleError: You cannot service an x86-based image from an x64-based host that does...
Environment LANDesk ProvisioningWinPE x64Target machine booting in UEFI mode Issue Trying to deploy an x86 operating system image on a device booting in UEFI mode fails.More specifically, WinPE x64 is...
View ArticleHow to use CSVIMPORT.EXE to import devices
Question: How to properly use CSVIMPORT.EXE to import devices. In order to properly import devices Network view, the proper formatting, syntax, and network information must be supplied. Answer:...
View ArticleClik here to view.
OSD/Provisioning: problem deploying WIM image after upgrade to 9.5 SP1
Environment LANDESK Management Suite 9.5 SP1 Issue After upgrading to 9.5 SP1, some software within a WIM image is not working properly anymore. You might receive the following error when booting...
View ArticleHow to use HIICLIENT in preview mode
Applies to LANDesk Management Suite 9.5 SP1 and newer DescriptionHardware Independent Imaging allows drivers to be injected during the imaging process specific to the destination hardware. During...
View ArticleWinPE image – Background changes not taking effect on WinPE images
Applies to LANDESK Management Suite 9.5 SP1 and olderThis issue was resolved in Service Pack 2IssueWhen changing the background image WinPE, the changes seem to take effect but when the PXE client...
View ArticleSchedule option
Applies to LANDesk Management Suite 9.0 SP3 and newerIssueCannot right-click a provisioning template to schedule it.Schedule option is greyed out.Cannot schedule OSD scripts.Cannot create OSD...
View ArticleError: "TFTP Timeout" when attempting to PXE Boot
IssuePXE Boot fails with a "TFTP TIMEOUT" error. This can also present as the following errors: PXE T04 PXE-E36PXE-E32PXE Error M0F CauseVPN software has changed the MTU setting in the registry on the...
View ArticleSome driver files are not getting copied to the computer with HII
Issue.RESOURCES and .CONFIG driver files are not getting copied to the computer being imaged with HII.Some of the video driver files specified with HII are not getting copied to the computers...
View ArticleHow to modify a computer's offline registry from WinPE
IssueSometimes it becomes necessary to make changes to the Windows registry in a machine that cannot be booted into. This can be especially important when troubleshooting things like a machine...
View ArticleError: "Copy driver failed" when adding drivers in HII
IssueWhen adding a driver to HII library via the "Manage driver library for HII" feature, users that are not Administrators receive an error that "Copy driver failed". CauseUser is not a member of the...
View ArticleClik here to view.
How to determine the partition size of an image
IssueHow can the partition size of a image be determined. SolutionUsing Imagew v2:Map a Drive to your Image locationBrowse to \\<Coreserver>\ldmain\osd\Imagew 2Double Click on ImagewCheck the...
View ArticleError: "PXE-E55 ProxyDHCP: No reply to request on port 4011"
IssueWhen booting into WinPE via PXE server, the following error message occurs:PXE-E55 ProxyDHCP: No reply to request on port 4011 CauseOption 60 is enabled on the DHCP Server ResolutionDisable Option...
View ArticleUnable to boot machine after imaging - Corrupt MBR
IssueSome computers, most notably Lenovo machines, after being imaged will not boot. The only solution is to repair the MBR.. On Lenovo machines, this most commonly presents itself as a blank screen...
View Article