PXE Boot devices with UEFI

NOTE: UEFI is only supported in Provisioning and not OSD. UEFI doesn't support a menu so you will need to use Scheduled Provisioning instead.

Provisioning OSD PXE Boot devices with UEFI. You must follow these steps to boot the device.

1. Add the client to the Inventory using the Bare Metal Server tool.
2. Schedule your Provisioning Template.
3. Add the machine to the task, but leave the physical device turned off.
4. Start the task. It will go to active, and then after a few seconds will go back to a Pending status.
5. Power on the device, and tell it to Network Boot (Usually F12 or Delete).
6. At this point the PXE Rep should see there is already a task waiting for that machine, and send it straight into WinPE, and automatically begin the Provisioning task.