Clik here to view.
How To: Change the HII Driver download location within the Patch Manager...
This article applies to LANDESK Management Suite 9.6Problem:When downloading HII drivers through Patch Manager, the path is hard-coded to "C:\Program...
View ArticleClik here to view.
How to: Mount the boot.wim using ImageX and Change the Core Name in the boot.wim
This document applies to LANDESK Management Suite 9.6IssueWhen running a Provisioning tempate the following error may occur:"error:(80001003H)Can't create file...
View ArticleIssue: User Profile desktop directory cannot be filtered using Profile Migration
Issue: Trying to fine tune our Profile Captures. I have two issues. I am unable to filter out specific file types from the capture.Even though I set specific filters for various file types such as...
View ArticleHow to: Modify a computer's offline registry from WinPE
IssueSometimes it becomes necessary to make changes to the Windows registry in a machine that cannot be booted into. This can be especially important when troubleshooting things like a machine...
View ArticleClik here to view.
How to Troubleshoot the PXE Boot process using Wireshark
Note: This article is a work in progress, however it has proven very useful in it's current state for troubleshooting, so it is being made public even though it is not complete. This document applies...
View ArticleCreating Machine Mapping Video Tutorial
This is a video tutorial on how to use Machine Mapping. This will cover the three provisioning action templates for which Machine Mapping was created. If you have found the video to be helpful please...
View ArticleLANDESK Provisioning Landing Page
Provisioning for LANDESK Management SuiteThis is a list of highly recommended documents for increasing overall knowledge of this component.The articles listed below are applicable to LANDESK Management...
View ArticleConfigure Target OS (CTOS) action fails in the template.
Issue:CTOS action is failing in the provisioning template.The image is syspreped.Following error is in the CONFIGTARGETOSHANDLER.LOG file:ConfigTargetOSHandler.exe:Could not stat dir :\ldprovisioning...
View ArticleUnable to modify the capture image provisioning template.
Issue:Unable to modify the capture image template. Prov_Action_Type table in the LANDESK database is missing some of the rows. Solution:1. Close the LANDESK Console. 2. Backup the Core Server and the...
View ArticleProvisioning Capture Image template with reboot action is stuck in active.
Issue:Reboot action remains active after the computer reboots.Added a reboot action after the Capture Image action in the template that uses IMAGEW.EXE as the imaging tool.The image is successfully...
View ArticleTemplate is not continuing after the CTOS action.
Issue:Computer reboots and runs through the sysprep process but does not run any of the actions in the System Configuration section.End of the CONFIGTARGETOSHANDLER.LOG file shows it found a SETUP...
View ArticleError: "Unable to find template for computer IDN xxxx" appears many time in...
IssueProvision.log on the core server is filled with these linesfor Unable to find template for computer IDN 11108.The log is similar to this one: ERROR ProvisioningService 3/29/2011 7:29:38 AM :...
View ArticleClik here to view.
Provisioning History shows "Running" state on completed task
Issue Provisioning history for a template shows a State of "Running" for a completed task. Cause This situation indicates that for some reason the status of the provisioning task was not updated from...
View ArticleClik here to view.
How to configure DHCP to work with LANDESK PXE boot
Note: This is customer submitted information. This is not officially supported by LANDESK Software.DescriptionWhen PXE booting using LANDESK PXE boot, a DHCP server is necessary to provide an IP...
View ArticleClik here to view.
Provisioning - Patch System action
To apply vulnerability patches to a system using the "Patch System" action in a provisioning template.
View Article