Clik here to view.
About advanced Windows Image Deployment Provisioning templates in LDMS 9.0
Applies to LANDesk Management Suite 9.0 Note: If you just want the templates, scroll to the bottom.PurposeThis article will discuss some advanced options for deploying Windows. With very few...
View ArticleClik here to view.
How to Capture a Windows 10 image with IMAGEX
Overview:This document provides the steps necessary to capture a Windows 10 image using IMAGEx.EXE for use in a provisioning template. The screenshots and steps in this document show Windows 10 but the...
View ArticleClik here to view.
How to Deploy a Windows 10 Image with ImageX
OverviewThis document contains the steps necessary to deploy a Windows 10 image in provisioning using ImageX. Although it mentions Windows 10, the same steps will work for Windows 7, 8 and 8.1....
View ArticleClik here to view.
How to Capture a Windows 7 image with OSD in LANDesk® Management Suite 9.5,...
Applies to LANDesk Management Suite 9.0 and 9.5 IssueHow can a Windows 7 image be captured for use with provisioning or OS Deployment with the LANDesk imaging tool (IMAGEW.EXE)?What mode is required...
View ArticleClik here to view.
WinPE drivers for VMWare Windows guests
Issue: You boot into WinPE from a VMWare Windows guest device configured with the VMXNET3 network adapter and/or the PVSCSI disk controller. In WinPE you don't have network and/or you don't see any...
View ArticleClik here to view.
Issue: Unable to obtain a lock on drive C:
OverviewDuring provisioning while deploying or capturing you may get the following error. Most commonly this error occurs when deploying an image but can occasionally occur during capture as well....
View ArticleClik here to view.
How To: Troubleshoot Provisioning Template Action Handlers
DescriptionCore LogsClient LogsSteps to disable removal of the client provisioning folderUnderstanding Action Handler Flow (Client)Action Handler LogsRelated Video: How to Troubleshoot Provisioning...
View ArticleClik here to view.
"No BitLocker recovery options available" after restart from Vboot
ProblemThe message "No BitLocker recovery options available" is shown on a computer after rebooting from the Vboot action in a provisioning template. CauseThe Vboot action performs a BCDEdit to have...
View ArticleDell USB-C Network Dongle causing Duplicate Inventory Entries
Issue: When Provisioning with a Dell USB-C Network Dongle you are getting Duplicate Device ID's in your Inventory Cause: The USB-C Network Dongle is designed to pass through the Internal Device MAC...
View ArticleClik here to view.
How to deploy User Profiles Using LANDESK Provisioning - Video
A video showing how to deploy a profile using a provisioning template.
View ArticleClik here to view.
Issue: PXE boot stops at downloading the BOOT.SDI file.
Issue:PXE boot fails at getting the BOOT.SDI file.LANDESK PXE and LANDESK PXE MTFTP services will not stay running on the PXE representative. Cause:The TFTP block size for the subnet is too big....
View ArticleClik here to view.
How to configure Self Electing PXE services in LDMS 2016.3 or higher
How To: Configure PXE services in LDMS 2016.3 or higherHow To: Configure PXE services in LDMS 2016.3 or higherWhat's new in LDMS 2016.3?Self-Electing Subnet ServicesSelf-Electing PXE...
View ArticleClik here to view.
Provisioning Action: Agent Install Fails When Last Action In WSCFG32.Log Is...
Error message:The error message is located in the agent install log (C:\ProgramData\LANDesk\Log\wscfg32.log). The last message in the log will look like so: Tue, 12 Sep 2017 09:32:59 INI:...
View ArticleClik here to view.
PXE Boot failing due to "TFTP", "PXE-032" or "NBD".
DescriptionWhen PXE Booting you receive an error before booting into WinPE.- TFTP Boot Issues- PXE-032 Error- NBD failing to load (freezes) CauseStarting in Windows 10 1709 build windows firewall has...
View ArticleClik here to view.
How to inject Inventory data during Provisioning or OSD
DescriptionTo show how LANDESK can be used to recycle existing information from the LANDESK Database back into a newly re-imaged computer.For this document, I chose to use the Windows "Description"...
View ArticleClik here to view.
Unable to login to provisioning client without full admin rights
DescriptionThis document describes an error in which users are unable to access the provisioning client unless they are granted the "LANDesk Administrator" role. ErrorProvUserValidator.Validate(), user...
View ArticleClik here to view.
PXE Service is giving "Subnet Error"
Problem:You will see an error under Self-Electing Subnet Services for the "Current State" which will show "Subnet Error" To review the cause of this error you will need to go to the PXE Rep / Client...
View ArticleClik here to view.
Provisioning stops and to resume an HP USB to Ethernet adapter has to be...
Provisioning stops and to resume an HP USB to Ethernet adapter has to be removed and reinserted. HP USB 3.0 to Gigabit RJ45 Adapter 829834-001 https://support.hp.com/hk-en/document/c04883825...
View ArticleClik here to view.
How to turn on logging for the LANDESK PXE service
Purpose This article covers how to enable PXE logging. This can be helpful when troubleshooting PXE representatives. Steps Modify the following registry key on the PXE Representative:x86 -...
View ArticleClik here to view.
Unable to login to provisioning client without full admin rights
DescriptionThis document describes an error in which users are unable to access the provisioning client unless they are granted the "LANDesk Administrator" role. ErrorProvUserValidator.Validate(), user...
View Article