Clik here to view.
LDMS 9.6 OS Provisioning - What's New
This article describes the new features and changes in the OS Provisioning tool in LANDESK Management Suite 9.6. The focus on changes for OS Provisioning in LDMS 9.6 has been geared towards simplifying...
View ArticleClik here to view.
Issue: Unsigned drivers not working in Hardware Independent Imaging (HII)
IssueDrivers listed as unsigned are not getting installed in HII. CauseInstalling unsigned drivers only works when HII runs in WinPE. In WinPE, HII calls DISM to install the drivers and passes the...
View ArticleManual PXE Representative Installation if PXE Rep deployment doesn't install
This article applies to LANDESK Management Suite 9.5 Issue: When running a scheduled task to deploy the PXE Representative it fails. Workaround: The PXE Representative can be manually installed by...
View ArticleClik here to view.
How to: Setup and configure initial HII Driver library, or setup HII for a...
Reviewed 7/30/2015Problem You are preparing to provision a new device model and need to setup HII driver detection. Hardware Independent Imaging (HII) is an action you can add to a Provisioning...
View ArticleHow to: Troubleshoot BSOD during boot after Provisioning and HII driver...
Reviewed 7/29/2015Problem After provisioning a device and deploying drivers via HII, the device bluescreens during boot. More Information When a device bluescreens during initial boot after...
View ArticleError: "Unable to find template for computer IDN xxxx" appears many time in...
IssueProvision.log on the core server is filled with these linesfor Unable to find template for computer IDN 11108.The log is similar to this one: ERROR ProvisioningService 3/29/2011 7:29:38 AM :...
View ArticleClik here to view.
How to collect logs from WinPE to troubleshoot a provisioning failure
Introduction Provisioning is one of the many features of LANDesk Management Suite. Often due to an incorrect configuration or other different type of issues, provisioning fails.If provisioning uses...
View Article"A fatal error occurred while trying to sysprep the machine" When running...
Reviewed 7/31/2015 For the most part, Windows 10 can be provisioned in the same manner as Windows 7 or Windows 8. One common issue we have run into when sysprepping Windows 10 is an error related to...
View ArticleClik here to view.
How To: Provision Windows 10 with LANDesk OS Provisioning
Reviewed 7/31/2015The basic process for provisioning a Windows 10 device is no different than any other Windows OS, with a couple of exceptions that will be discussed below. Here are the general steps...
View ArticleImageW User Manual
Purpose This document contains the Image for Windows (ImageW) User manual. This is provided from TeraByte Unlimited. This can be useful when customizing Provisioning commands with the ImageW.exe tool...
View ArticleIssue: OSD.Upgrade.exe error during installation
Applies to LANDESK Management Suite 9 SP3 and newer DescriptionOSD.Upgrade.exe is run during the installation of a LANDESK Service Pack or any LANDESK patch that updates the WinPE image (boot.wim). It...
View ArticleIssue: Disconnected template is failing to create on a Remote Console.
Issue:It is failing when trying to copy the image file to the USB drive.Following is in the provisioning.log file with xtrace enabled on the Console computer:ERROR BootMediaHelper 8/3/2015 3:06:08 PM...
View ArticleError: "TFTP Timeout" when attempting to PXE Boot
IssuePXE Boot fails with a "TFTP TIMEOUT" error. This can also present as the following errors: PXE T04 PXE-E36PXE-E32PXE Error M0F CauseThe most likely cause is that the LANDESK PXE MTFTP service is...
View ArticleClik here to view.
How to test drivers compatibility within WinPE
Environment: LDMS 9.6Review Date: 9/15/2014Error Message: DrvLoad: Unable to load X:\InstalledDrivers\...\e1d6432.inf (Error 0x80070002)Problem: When WinPE is attempting to load a driver, it...
View ArticleClik here to view.
How to Create a Provisioning Only User
Purpose This article outlines how to add a Provisioning only user. This will provide rights to Provision devices, while restricting access to other features of the program. Steps Add the user to the...
View ArticleHow to: Manually install a PXE representative with a USB key
Applies to all versions of LANDESK Management Suite Question: How to manually install a PXE representative with a USB key? You may want to create a PXE representative on a distant managed device on...
View ArticleClik here to view.
How to Provision a UEFI Tablet using ImageW
Purpose This document will outline getting started with provisioning a tablet using UEFI Unified Extensible Firmware Interface (UEFI) firmware..Table of Contents Affected PlatformAssumptionsSamples and...
View ArticleHow To: Use Unmanaged Device Discovery (UDD) for Rogue Device Detection
reviewed 8.10.2015How To: Use Unmanaged Device Discovery (UDD) for Rogue Device DetectionDisclaimer: UDD was not designed to be used for this purpose. UDD is capable of scanning for any device on...
View ArticleUpdating the WinPE image on PXE representatives
Updating WindowsPE ImageAny time that a driver is added to the WinPE image, or the WinPE image is modified in any way, those changes have to be transfered to all PXE representatives. Normally this is...
View ArticleClik here to view.
How To: Troubleshoot Inject Script action during OS Provisioning
Date reviewed: 6/10/2015Problem: Your provisioning template is failing to inject the unattend.xml script correctly, or the unattend.xml is injecting but not being utilized by Windows. You may see a...
View Article